Joggers Tech Pack Template
Bottoms are where most fit problems hide. Front rise, back rise, thigh and knee width decide whether joggers look tapered or baggy, and a vague waistband spec leads to elastic that is too tight or rolls over. This template includes 12 graded points of measure, a fleece BOM with elastic, drawcord, eyelets and pocket bags, and waistband instructions.
Joggers and sweatpants are the same base pattern — an elastic waistband with a drawcord and a tapered leg — so one tech pack covers both. Many brands sell the same pant under either name; if you want the open-hem look instead of a rib cuff, widen the leg opening and say so in the construction notes.
Joggers measurement spec (inches)
Graded XS–XXL with M as the base size. Switch to centimeters in the generator.
| Code | Point of Measure | XS | S | M | L | XL | XXL | Tol ± |
|---|---|---|---|---|---|---|---|---|
| A | Waist Width (Relaxed) Across top of waistband, relaxed | 13 | 14 | 15 | 16 | 17 | 18 | 0.5 |
| B | Waist Width (Extended) Across top of waistband, fully stretched | 17.5 | 18.75 | 20 | 21.25 | 22.5 | 23.75 | 0.5 |
| C | Hip Width 3" above crotch, side to side | 20 | 21 | 22 | 23 | 24 | 25 | 0.5 |
| D | Front Rise Crotch seam to top of waistband, front | 10.75 | 11.125 | 11.5 | 11.875 | 12.25 | 12.625 | 0.25 |
| E | Back Rise Crotch seam to top of waistband, back | 14 | 14.5 | 15 | 15.5 | 16 | 16.5 | 0.25 |
| F | Inseam Crotch point to leg opening edge | 29 | 29 | 29 | 29 | 29 | 29 | 0.375 |
| G | Thigh Width 1" below crotch, across leg | 12 | 12.5 | 13 | 13.5 | 14 | 14.5 | 0.25 |
| H | Knee Width Halfway down inseam, across leg | 8.75 | 9.125 | 9.5 | 9.875 | 10.25 | 10.625 | 0.25 |
| I | Leg Opening (Relaxed) Across leg cuff, relaxed | 4 | 4.25 | 4.5 | 4.75 | 5 | 5.25 | 0.25 |
| J | Leg Cuff Height Height of finished leg cuff | 3 | 3 | 3 | 3 | 3 | 3 | 0.125 |
| K | Waistband Height Height of finished waistband | 1.75 | 1.75 | 1.75 | 1.75 | 1.75 | 1.75 | 0.125 |
| L | Side Pocket Opening Length of side pocket opening | 6.5 | 6.5 | 6.5 | 6.5 | 6.5 | 6.5 | 0.25 |
Need a shorter chart for your product page? Pick the rows you want in the size chart generator.
Bill of materials
| Component | Material / Description | Placement | Color | Qty |
|---|---|---|---|---|
| Shell Fabric | 80% cotton 20% polyester brushed-back fleece, 320 GSM | Legs, waistband | Per colorway | |
| Rib | 2x2 rib, 95% cotton 5% spandex, 320 GSM | Leg cuffs | Match shell | |
| Waistband Elastic | 1.5" knitted elastic | Waistband | White | 1 |
| Drawcord | Flat cotton drawcord, 3/8" wide, 50" long | Waistband | Match shell | 1 |
| Eyelets | Metal grommets, 8 mm | Front waistband | Antique brass | 2 |
| Pocket Bag | Self fabric or 140 GSM cotton jersey | Side pockets | Match shell | 2 |
| Thread | Polyester core-spun, Tex 27 | All seams | Match shell | |
| Main Label | Woven label, 2" x 0.75" | Center back neck | 1 | |
| Care / Content Label | Printed satin label | Left side seam, 3" above hem | 1 | |
| Size Label | Woven size tab | Under main label | 1 | |
| Polybag | Recycled LDPE, with suffocation warning | Packaging | Clear | 1 |
Construction notes
- Waistband: elastic fully encased, drawcord exits through front eyelets.
- Side seam pockets: bartack at top and bottom of each pocket opening.
- Inseam and outseam: 4-thread overlock; crotch seam reinforced with twin-needle topstitch.
- Leg cuffs: 4-thread overlock, coverstitch topstitch.
- Stitch density: 12-14 stitches per inch.
- Fabric must be pre-shrunk; max shrinkage 5% in length and width after 3 home washes.
Fabric
Joggers often share the hoodie fleece so the set matches. If you want a lighter pant, French terry around 280 GSM is a common alternative.
Checking a fabric weight? Calculate the GSM from a swatch, convert GSM to oz/yd², or read the fabric weight guide for typical weights by fabric and by garment. Using French terry instead of fleece? See what the loops do and which weight to pick.
Tips before you send it to a factory
- Give both relaxed and extended waist measurements so the factory picks the right elastic.
- Inseam is usually not graded for regular-length styles. If you offer short and long lengths, add them as separate rows.
- Bartack both ends of each pocket opening and reinforce the crotch seam.
Ordering a sample to check the fit? Fill in the sample order form and send it with this tech pack.
FAQ
What is the difference between front rise and back rise?
Front rise runs from the crotch seam to the top of the waistband at the front; back rise does the same at the back and is always longer to give room to sit.
Should I grade the inseam?
Most brands keep one inseam for regular length across sizes. Grade it only if your fit sample shows the smaller or larger sizes need it.
Can I use this joggers template for sweatpants?
Yes. Sweatpants and joggers are cut from one base pattern, so keep the measurements here and change the finish if you need to: the rib cuff reads as a jogger, an open hem with a wider leg opening as a sweatpant. Adjust the knee and leg opening rows to match, and say which hem you want in the construction notes.
Customize this joggers tech pack
Need fabric or a sample made? Ask us for a quote.