Neck Label & Care Label Template

Every garment needs a label in the back neck and a care label in the seam. This clothing label template does both: type your brand, size and fibre content, choose the wash symbols your garment needs, and print a sheet at actual size — a 50 mm label comes out of the printer 50 mm wide, ready to cut and send to a supplier.

Leave a field empty and it is left off the label. The preview updates as you type; nothing you enter is uploaded.

Your Brand

M · Made in Portugal

100% Cotton

40

50 × 20 mm (1.97 × 0.79 in) — the PDF prints it at this size.

Download your label sheet

Enter your email to download the PDF. You only need to do this once.

We never sell your email. See our privacy policy.

What goes on a neck label

A neck label is small, so it only carries what a shopper and a warehouse need to see at a glance:

In the United States the label is also expected to identify the business that made or imported the garment — a company name or an RN number issued by the FTC.

What goes on a care label

Care labelling is regulated and the rules are not the same in every market, so check the requirement where you sell — and when in doubt, print both the symbols and the words. See what the rules require below.

Label sizes people actually order

There is no global standard label size: what you get is whatever your supplier's cutter, loom or print plate is set up for. The four below are common starting points — the generator above will make any size between 20 and 120 mm wide. 20 mm is where the range starts because that is the width at which five care symbols still sit across one row with a margin either side of them; narrower than that they crowd the cut line.

LabelCommon sizeIn inchesWhat it is for
Woven neck label50 × 20 mm1.97 × 0.79 inThe main label in the back neck: brand, size and country of origin. Woven labels are made to a cutter, so the size is fixed per order.
Printed neck label40 × 15 mm1.57 × 0.59 inScreen printed or heat transfer straight onto the inside back of the shirt. Nothing to sew in, no scratchy edge, and one less label to buy.
Care label50 × 25 mm1.97 × 0.98 inFibre composition and care instructions, usually folded into a side seam or tucked under the main label at the back neck.
Hem tag / flag label30 × 30 mm1.18 × 1.18 inSmall square or flag label sewn into the hem or side seam. Brand mark only — it is a detail, not a place for instructions.

Label sizes are set by the label supplier's tooling, not by us, so treat this table as a starting point and confirm the exact size with whoever makes yours.

Care label symbols and what they mean

Five families do all the work, and two rules read the rest: a cross through a symbol means do not do it, and the more dots, the hotter — one dot is low temperature, three is high. The number inside a washtub is the highest temperature the garment can take.

SymbolInstructionWhat it means
30Machine wash 30 °C
Washing
Machine wash at up to 30 °C. The gentlest machine wash — use it for wool blends and anything that shrinks.
40Machine wash 40 °C
Washing
Machine wash at up to 40 °C. The usual instruction for cotton jersey, sweatshirts and most day-to-day knitwear.
60Machine wash 60 °C
Washing
Machine wash at up to 60 °C. For white cotton, towels and anything that needs a hot wash to come clean.
95Machine wash 95 °C
Washing
Machine wash at up to 95 °C (boil wash). Only for undyed or colourfast cotton and linen that can take it.
Do not wash
Washing
Do not wash. The garment is cleaned another way — say which on the label if it is dry clean only.
Do not bleach
Bleaching
Do not bleach. The common instruction on anything dyed: bleach takes the colour out before it takes the stain out.
Bleach when needed
Bleaching
Bleach when needed, with any bleach (chlorine or oxygen). Mostly used on white cotton, rarely on knitwear.
Tumble dry low
Tumble drying
Tumble dry on low heat (the one dot). The safe default for jersey and anything with elastane, which hates heat.
Tumble dry medium
Tumble drying
Tumble dry on normal heat (two dots). Faster, but it shrinks cotton and dulls prints sooner.
Do not tumble dry
Tumble drying
Do not tumble dry. Line dry instead — it is the instruction that keeps knitwear in shape and prints intact.
Iron low (110 °C)
Ironing
Iron at low temperature, up to 110 °C (one dot). For synthetics and anything with a print on it.
Iron medium (150 °C)
Ironing
Iron at medium temperature, up to 150 °C (two dots). The usual setting for cotton and cotton blends.
Iron high (200 °C)
Ironing
Iron at high temperature, up to 200 °C (three dots). Cotton and linen only, and never on a print.
Do not iron
Ironing
Do not iron. Common on heat transfer prints, coated fabrics and anything embossed, because heat flattens them.
PDry clean, any solvent (P)
Dry cleaning
Professional dry cleaning, with the solvent letter P — the usual instruction when the cleaner is allowed to choose.
Do not dry clean
Dry cleaning
Do not dry clean. Says professional dry cleaning is not appropriate for this garment — how it should be cleaned instead is what the other symbols on the label say.

Pick the symbols in the generator above and the PDF prints them on the label, with this same list of instructions underneath for whoever reads it next.

How to print labels at actual size

This neck label template prints at the exact size you set, so you can hold the real thing against the neckline before you order anything.

  1. Set the size. Choose a preset or type your supplier's size. Width and height are in millimetres, the unit every label supplier quotes in.
  2. Save the PDF and print it at 100%. Turn off "fit to page" and "shrink oversized pages" — both of them scale the sheet, and a scaled label is the wrong size.
  3. Measure the 100 mm line at the top of the sheet with a ruler. If it is not 100 mm, your print settings scaled the page: fix that before you judge the label.
  4. Cut one out and lay it on the garment, at the neck and in the seam, to check the type size is readable and the label is not too big for the neckline.
  5. Send the same PDF to your supplier as your artwork, along with the size in millimetres. The rest of the sheet is the same label repeated, so you can print and cut a set for samples.

Woven, printed or heat transfer?

Ask your garment factory what they already do in-house before ordering labels separately: most of them print or sew a label as part of production, which is one less supplier and one less shipment to track. That is also the label step in our guide to starting a clothing brand.

What the rules require

Care and content labelling is regulated in most markets, and the requirements are not the same everywhere: some markets expect the instructions in words, others accept symbols, and imported goods usually have to state the country of origin. The rules also change. Before you print, check the current requirement for the market you sell in — the FTC's care labelling rule in the United States, the EU textile labelling regulation in Europe — and if you are unsure, put both words and symbols on the label. This page is a free template, not legal advice.

FAQ

Do I need both a neck label and a care label?

Not always. Big brands keep them separate so the neck label stays clean, but a small brand can print everything onto one label and put it in the back neck, or print the care content as a second small label in the side seam. What matters is that the composition, the care instructions and the country of origin are somewhere on the garment.

What size label should I order?

Start from what has to fit on it. A brand name, a size and "Made in China" fit in 50 × 20 mm; add a composition and five care symbols and you want the 50 × 25 mm version. Type your text into the generator and it will tell you the size you set — then check the type is still readable before you order.

What care symbols does a cotton t-shirt need?

Machine wash 30–40 °C, do not bleach, tumble dry low, iron medium, and do not dry clean. That set is what the generator starts from. If the garment is a poly-cotton blend or has a print on it, drop the maximum iron temperature and keep the low tumble dry.

Do I need my own labels if I print on blank garments?

The blanks already carry the maker's care label, and that label describes the actual garment, so leaving it in place is the honest option. If you cut it out, you take on the job of telling customers how to wash the garment. Many brands print their own label over the top of it or sew a neck label next to it.

Can I sell garments using a label made with this tool?

Yes — the PDF is yours, no attribution needed, and the symbols are the standard care labelling symbols rather than any one company's artwork. Just check the labelling rules for the market you sell in before you print, because those rules are what a customs officer or a trading standards officer will apply, not this page.

Can I make a custom shape, like a flag label or a folded care label?

This tool prints a rectangle, which covers neck labels, printed labels and straight care labels. Flag labels are folded over the seam and care labels are often folded in half — for those, print the rectangle at the folded size and ask your supplier how they cut and fold it.

Open the tech pack generator

Need fabric or a sample made? Ask us for a quote.

Get new tech pack templates & factory tips

1–2 emails a month. Clicking Subscribe signs you up immediately. Unsubscribe anytime.

We never sell your email. See our privacy policy.