What French terry is
French terry is a knit with loops on one side. The face is flat and smooth; the back carries an extra yarn held in loose loops — the same looped structure a towel has, but knitted much finer and lighter. UK mills and shops sell it as loopback, and suppliers also write it as French terry cloth; all three names mean the same fabric. Most of it is cotton or a cotton-rich blend — what shops and mills call cotton French terry — and it is knitted in a tube, so it behaves like a t-shirt knit: it stretches across the width, it breathes, and cut edges curl.
The loops are the point. Nobody brushes them: they stay loops, and that is what separates French terry from the sweatshirt fleece most hoodies are made from. Fleece starts as the same looped knit and then has its loops brushed and broken into a raised pile. Same beginning, different finish, different garment — terry is lighter and drapes, fleece is warmer and stands up. If a supplier calls a brushed fabric "French terry", ask to see the back of it.
How to tell it apart from fleece, jersey and pique
Turn the swatch over. The back tells you which fabric you are holding, whichever name the shop used.
| Fabric | The back of it | Typical weight | Where you see it |
|---|---|---|---|
| French terry | Loops, left as loops | 240–320 GSM | Sweatshirts and hoodies, joggers, shorts |
| Brushed fleece | Loops brushed into a raised pile | 280–400 GSM | Classic hoodies and crewnecks |
| Cotton jersey | Flat, the same as the face | 140–260 GSM | T-shirts and light tops |
| Pique | Flat back under a textured face | 200–240 GSM | Polo shirts |
Measuring a swatch instead of reading a label? Work out the GSM from a 10 × 10 cm square, or convert GSM to oz/yd² if your mill quotes in ounces.
Typical weight of French terry
The fabric weight guide lists 240–320 GSM as the usual range for garment terry: shorts, joggers and unstructured sweatshirts are all cut from it. The light end, around 240–260 GSM, is what gets sold as summer terry, and heavier loopback for structured hoodies and jackets goes up to about 400. US mills quote weight in ounces per square yard instead: 1 oz/yd² = 33.9057 g/m², so the 280 GSM terry a sweatshirt is cut from is about 8.26 oz. Weight on its own does not describe the fabric: the same number can feel different from one mill to the next, because yarn count, loop length and finish are not in the number.
| Weight | In ounces | What it feels like | Where it is used |
|---|---|---|---|
| 240–260 GSM | 7.08–7.67 oz/yd² | Light terry Thin loops, more drape, dries faster | Summer shorts and dresses, lightweight sweatshirts, kidswear |
| 280–320 GSM | 8.26–9.44 oz/yd² | Sweatshirt terry Loops hold air, so it is soft inside and smooth outside | Sweatshirts and hoodies, joggers, heavier shorts |
| 340–400 GSM | 10.03–11.80 oz/yd² | Heavy terry Dense and structured, stands up on the hanger | Structured hoodies, jackets, workwear |
Typical industry ranges, not a standard and not any one mill's data. Confirm the weight on a swatch of the fabric you will actually receive, and allow ±5% in your spec. Buying terry itself? Ask us for a quote — we are a knit fabric mill in Guangzhou.
What to write in your tech pack
The shell fabric line is the shortest part of a bill of materials, and it is the line mills and factories quote from. Five fields do most of the work.
| Field | What to write | Why it matters |
|---|---|---|
| Composition | 100% cotton, or 60% cotton / 40% polyester (CVC) | Cotton feels softer against the skin; polyester helps the garment hold its shape and dry faster. The blend also moves the price band, so write it before you ask for a quote. |
| Weight | 280–320 GSM, ±5% | Mills quote from the weight, and knit weight drifts a few percent from roll to roll. Without the tolerance you have no grounds to reject a roll that comes in light. |
| Finish | Loop back, pre-shrunk | Loop back is the fabric you asked for; brushed back is a different, warmer cloth. Pre-shrunk tells the factory the finished measurements will not move much after the first wash. |
| Stretch | 95% cotton / 5% elastane (only if you need it) | Add elastane when the garment has to spring back — fitted tops, leggings, tight cuffs. The percentage changes the cut and the sewing, so name it. |
| Shrinkage test | Shrinkage % after one home wash, in writing | A cotton loop knit can move a few percent in the first wash. Get the mill number before bulk and check a washed swatch against your spec. |
The free tech pack generator has these fields in its BOM table, and the garment templates come with a starting fabric line you can edit.
Which garments are made from French terry
Sweatshirts and hoodies (the unstructured ones), joggers and sweatpants, lounge and athletic shorts, summer dresses and light tops, and kidswear. On this site the shorts template already lists 100% cotton French terry at 280 GSM; the joggers template uses the same fleece as the hoodie and notes terry as the lighter option; the hoodie and sweatshirt templates start from brushed fleece — for the unbrushed version, keep the measurements and construction and change the shell fabric to terry at 280–320 GSM.
Ordering a sample in it? Fill in the sample order form, send it with your tech pack, and name the fabric the way the mill does so the sample and the bulk order are cut from the same cloth.
FAQ
What is French terry fabric made of?
Mostly cotton, often with polyester in the blend — 60% cotton / 40% polyester is common — and sometimes 3–5% elastane when the garment has to spring back into shape. The loops are what make it terry; the fibre mix decides how it feels and how much it shrinks.
Is French terry the same as fleece?
No. They start the same way, as a knit with loops on one side, but fleece has those loops brushed and broken into a raised pile. Fleece is warmer and more structured; French terry is lighter, drapes more and feels smoother against the skin.
Which side of French terry is the right side?
Normally the smooth side faces out and the loops stay inside, which is why the inside of a sweatshirt feels soft. Some brands wear the loops out for texture. Decide it in the tech pack and say it in one line ("loop side out") or the factory will choose for you.
Is French terry good for summer?
The light end of the range is: around 240–260 GSM it is sold as summer terry, and it makes breathable shorts, dresses and light tops. From 280 GSM up it is a cool-weather fabric, because the loops trap air.
Does French terry shrink?
A cotton loop knit can move a few percent in the first wash. Ask the mill for pre-shrunk fabric and write a shrinkage limit into the spec — the templates on this site use max 5% in length and width after three home washes — then wash a swatch before you approve bulk.
Is French terry the same as terry cloth?
Not quite. Terry cloth usually means towelling: the looped fabric towels and robes are made from, often looped on both sides and much heavier. French terry is the fine knit version of the same idea, looped on one side only and knitted light enough to wear as clothing. If a shop sells "French terry cloth", look at the weight first.
Need fabric or a sample made? Ask us for a quote.